This chapter focuses solely on explaining the connections and antennas of the AiO Controller. For information about its functions and buttons, please refer to the section dedicated to the
AiO Controller in the manual.
Bottom
On the left side, you will find the power button for the AiO controller. When this is activated the controller and the tablet (if connected) will turn on.
In the centre is the tripod screw used to secure accessories such as a neck strap for a secure grip when the controller is not mounted on a tripod.
On the right, you will find the USB-C charging port for the AiO controller.
The charger required is 45w, if you use a higher wattage charger than 45w please ensure it is a PD, Power Delivery or Power Distribution charger otherwise you will damage the controller which will not be covered by warranty.
The Carplounge 45w charger can be found on our website in the link below.
https://www.carplounge.co.uk/detail/index/sArticle/1981
When connected it will charge the AiO controller and tablet (if plugged in) at the same time. Charging is indicated by a red LED on the right LED strip.
On the front side, you will find all the control buttons and 2x Joysticks (for more information, refer to the AiO-Controller section) and two LED strips.
The upper left LED strip displays the battery level of the controller in 25% increments. When all four LEDs are lit, it indicates a full charge, and when only one LED is lit, it indicates a remaining battery level of 25%.
The right LED strip is a multi-colour information strip. When activated, it displays the following functions: